Large stone pillars (håligi) capped by stone capitals (tåsa) carved by the ancient Chamorro people to use as building supports. The latte stones have been made of limestone, basalt, or sandstone, and quarries have been found on all of the larger islands of the Marianas.
How to Install Proteco Mover 5 Sliding Gate Opener
Proteco Mover 5 is a sliding gate opener for rack-driven gates up to 500 kg. It is a reliable and easy-to-use automation system that can be installed in a few steps. In this article, we will show you how to install Proteco Mover 5 using the installation manual provided by the manufacturer.
What You Need
Before you start the installation, make sure you have the following items:
Proteco Mover 5 motor unit
Proteco Q80S control unit
Proteco rack and fixing accessories
Proteco photocells and safety devices
Proteco remote controls and receivers
Power supply cable and electrical wires
Screwdriver, wrench, drill, level, and measuring tape
Follow these steps to install Proteco Mover 5:
Check the gate's structure, weight, dimensions, and type to make sure they are suitable for the automation.
Choose the best position for the motor unit on the gate's side. It should be at least 15 cm from the ground and 10 cm from the edge of the gate.
Mark the holes for the anchor plate on the ground using the template provided in the manual. Drill the holes and fix the anchor plate with screws and plugs.
Attach the motor unit to the anchor plate with bolts and washers. Adjust the height and angle of the motor unit using the spacers and nuts.
Install the rack on the gate's lower edge. Make sure it is parallel to the ground and aligned with the pinion of the motor unit. Use screws and brackets to fix the rack segments.
Connect the power supply cable to the motor unit. Use a junction box to protect the connections.
Install the control unit inside a weatherproof enclosure near the motor unit. Connect it to the power supply and to the motor unit according to the wiring diagram in the manual.
Install the photocells and other safety devices on both sides of the gate's opening. Connect them to the control unit according to the wiring diagram in the manual.
Install the remote control receiver inside or near the control unit. Connect it to the control unit according to the wiring diagram in the manual.
Program the remote controls using the buttons on the control unit. Refer to the manual for more details on how to program different functions and settings.
Start up the automation system by pressing P1 on the control unit. The system will perform a self-learning cycle to memorize the gate's opening and closing limits.
Test the automation system by operating it with remote controls or manual buttons. Check that all safety devices work properly and that there are no obstacles or interferences.
You have successfully installed Proteco Mover 5 sliding gate opener. For more information, you can download [^4^] or view [^6^] Proteco Mover 5 installation manual in PDF format online. You can also contact Proteco customer service for any questions or assistance. aa16f39245